Operating Elements And Connections; Safety Notes - Monacor DTM-610 Manual De Instrucciones

Please unfold page 3. Then you can always
see the operating elements and connections
described.
1 Operating Elements and
Connections
1 Temperature sensor
2 Laser beam exit
3 Display
4 Button
tion on and off
5 Button
off
6 Button "MEAS" for switching on the unit and
for activating the measuring procedure:
a. for measuring hold the meter in direction
of the unit and keep button "MEAS" press-
ed for approx. 1 second
b. after releasing the button the measuring
value is automatically "frozen"
c. the unit switches off automatically after
approx. 15 seconds
7 2.5 mm jack; output for a DC voltage which is
proportional to the measured temperature
(1 mV/°C)

2 Safety Notes

This unit corresponds to the directive 89/336/
EEC for electromagnetic compatibilty.
Warning! Never look into the laser beam or
direct the beam on the eyes of other persons.
Do not hold the laser beam into explosive
gases!
Keep the meter out of children's reach!
for switching the display illumina-
for switching the laser beam on and
GB
9