Monacor DTM-610 Manual De Instrucciones página 12

GB
symbol
the display as warning note even after the unit
is automatically switched off. To deactivate the
laser beam, press button
Warning! Never look into the laser beam or
direct it towards the eyes of other persons. Be
especially careful when aligning the unit on
highly reflective surfaces. Do not let the laser
beam reflect into the eyes.
Fig. 2 on page 3 shows the spot diameter de-
pending on the distance to the object. The
laser beam approx. indicates the spot centre
and should exactly be aligned to the object.
jects into it. This leads to false measuring re-
sults.
4) After releasing button "MEAS" the meas-
urement is terminated and the measuring
value is automatically "frozen" on the display.
Symbol
laser beam extinguishes.
5) For better reading of the temperature the dis-
play illumination can be switched on with
button
press button
6) After button "MEAS" has been released, the
measuring value is kept "frozen" approx.
15 seconds. Then the unit switches off auto-
matically to protect the batteries. For a new
measurement press button "MEAS" again.
7) If the meter is not used for a longer period of
time, the batteries should be taken out. Thus,
possible damage to the unit is avoided in case
the batteries should leak.
12
is displayed which will remain on
Do not grasp into the spot or hold other ob-
is displayed. At the same time the
H
(4). To deactivate the illumination,
again.
again.