Operating Elements And Connections - Monacor DTM-506RS Manual De Instrucciones

Please unfold page 3. Then you can
always see the operating elements
and connections described.
Contents
1 Operating Elements and
Connections . . . . . . . . . . . . . 13
2 Safety Notes . . . . . . . . . . . . . 14
3 Applications . . . . . . . . . . . . . 14
4 Setting into Operation . . . . . 14
5 Carrying out Measurements 15
5.1 Basic adjustments . . . . . . . . . . 15
5.1.1 Selecting the type of
temperature sensor . . . . . . . . . 15
5.1.2 Switching between Celsius
and Fahrenheit . . . . . . . . . . . . 15
5.1.3 Setting the internal clock . . . . . 15
5.2 Measuring the temperature and
the temperature difference . . . 15
5.3 Measuring the maximum,
minimum, and average
temperatures . . . . . . . . . . . . . . 16
5.4 Warning in case of upper or
lower deviations from
limiting values . . . . . . . . . . . . . 16
5.5 Relative value measurement . 17
5.5.1 Using the current temperature
as reference value . . . . . . . . . 17
5.5.2 Entering a certain temperature
as reference value . . . . . . . . . 17
5.6 "Freezing" a measured value . 17
5.7 Activating the
display illumination . . . . . . . . . 17
6 Replacing the Battery . . . . . . 18
7 Operation via a Computer . . 18
7.1 Installing the THERMO software 18
7.2 Setting up a connection to the
computer . . . . . . . . . . . . . . . . . 18
7.3 Acquisition of the measured
values with the computer . . . . 19
7.3.1 Functions in the menu
"READING" . . . . . . . . . . . . . . . 19
7.3.2 Graphic representation . . . . . . 20
7.3.3 Recording the measured values 20
8 Specifications . . . . . . . . . . . . 21
1 Operating
Connections
1 Connection panel:
Connection "RS232" for a computer
with RS-232 interface
Jacks "T1" and "T2" for the supplied
temperature sensors
2 Display comprising
a main temperature display
b second temperature display
c time display
3 On/off button
The thermometer
switched off while the "Record" mode
is switched on [see button MIN/
MAX (10)]
4 Button "°C/°F" for switching the tem-
perature indication from Celsius to
Fahrenheit and vice versa
5 Button "T1 T2/T1-T2" for switching
the main display (a)
Basic adjustment:
Temperature display of sensor T1
1st actuation of button:
Temperature display of sensor T2
2nd actuation of button:
Temperature display of the differ-
ence between sensors T1 and T2
(T1 minus T2)
3rd actuation of button:
Basic adjustment
6 Button "REL" for switching on and off
the relative value measurement [only
for the main display (a)]
7 Button "Hi/Lo LIMITS" for switching
on and off the warning mode in case
of upper or lower deviations from
limiting values entered before [only
for the main display (a)]
8 Button "T1 T2/T1-T2" for switching
the second display (b)
Basic adjustment:
Temperature display of sensor T2
1st actuation of button:
Temperature display of the differ-
ence between sensors T1 and T2
(T1 minus T2)
2nd actuation of button:
Temperature display of sensor T1
3rd actuation of button:
Basic adjustment
Elements and
cannot be
GB
13