Technical Description; Installing The Seat Heater - Dometic GROUP WAECO MagicComfort MSH60 Instrucciones De Montaje Y De Servicio

Technical description

5 Technical description
The heating elements for the seat heater MagicComfort MSH60 and
MagicComfort MSH601 can be installed in the driver's seat and in the pas-
senger seat.
The shape of the seat is not altered by the heating elements.
The seat heater is operated using a switch.
6

Installing the seat heater

6.1 Tools required (fig. 1, page 3)
For installation and assembly you will need the following tools:
 Drill bit set (1)
 Drill (2)
 Screwdriver (3)
 Set of ring or open-ended spanners (4)
 Measuring ruler (5)
 Hammer (6)
 Centre punch (7)
To make and test the electrical connection, the following tools are required:
 Diode test lamp (8) or voltmeter (9)
 Crimping tool (10)
 Insulating tape (11)
 Hot air blower (13)
 Soldering iron (14)
 Solder (15)
 Cable bushing sleeves (if necessary)
To fasten the cables you may require additional cable binders.
22
MagicComfort MSH60, MSH601
EN