Firmware Upgrade; Upgrading Firmware; Restoring Previous Firmware; Re-Establish Wi-Fi Network Of Center And Stations - Philips WACS7000 Manual Del Usuario

13.1 Upgrading firmware
The supplied PC Installer CD Wireless Audio
Device Manager (WADM) helps you get the
upgrades for WACS7000 Center and Station.
1
Register your Philips Wireless Music Center with
www.club.philips.com
2
Download the firmware upgrade files and store
them on your PC
3
Place Center and Station(s) side by side on a
flat and firm surface
4
Connect Center and Station(s) to power
supply
➜
HD screen appears on Center
➜
HD screen appears on Station(s) when the
Station is connected to Center
5
Connect Center to your PC via the supplied
ethernet cable.
6
Install and lauch WADM (see Connect to your
PC section B)
7
Click to enter the Firmware upgrade sub-menu
8
As prompted, click Browse and indicate the
location where you kept the firmware upgrade
files on PC
9
Click Apply to start upgrading firmware
On Philips Wireless Music Center:
➜
The display shows "Updating firmware,
please wait..."
➜
Center will reboot itself during the
installation process
➜
When Center returns to HD screen, the
installation is completed
Then, on Philips Wireless Music Station:
➜
Installation starts automatically
➜
When Station returns to HD screen, the
installation is completed

13. Firmware Upgrade

IMPORTANT!
On Philips Wireless Music Center/Station:
- Never interrupt the firmware upgrading
before its completion.
- Before finishing the installation, never
operate other functions.
13.2 Restoring previous firmware
After the Center's firmware is upgraded, you can
restore it to its previous version as desired.
1
On Center, select HD mode and then, select
Restore firmware
a. Press MENU to enter the MENU screen
b. Press the navigation controls 3 or 4 and 2 to
enter Settings, Firmware and Restore firmware
one by one.
2
Press 2 to select Yes
After upgrading or restoring the Center's
firmware, you need to re-establish the Wi-Fi
connection between Center and Stations.
13.3 Re-establish Wi-Fi network
of Center and Stations
1
On Center, select HD mode and then enter
Installation Mode
a. Press MENU to enter the MENU screen
b. Press the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
c. Press 3 or 4 and 2 to select Add New
Station
➜
Searching for Stations starts
2
On Stations, enter Installation Mode
a. Remove the power plug of Stations and then,
connect them to the power supply again
➜
Connecting to Center appears
b. On the remote control, press MENU to
enter the selection screen of Installation Mode
and Select Server
c. Press the navigation controls 3 or 4 and 2 to
enter Installation Mode
➜
The Stations start to connect Center
3
Press STOPÇ on Ce;nter when all the Stations
are found
59