Auto-Standby; Volume Control; Mute; Sound Control - Philips WACS7000 Manual Del Usuario

5. Basic functions

5.3 Auto-standby

When the set has reached the end of playback/
recording and remains in the stop position for
more than 20 minutes, the set will switch to
standby mode automatically to save power.

5.4 Volume control

1
Check that playback has started
2
Adjust the volume with VOL +/- buttons
➜
Display shows the volume bar, indicating the
volume level

5.5 MUTE

During playback, you can temporarily switch off
the sound without switching off the set.
1
Press MUTE to switch off the sound.
➜
The icon appears. Playback continues
without sound.
2
To switch on the sound, press MUTE again or
adjust the volume with VOL +.
– You can also switch on the sound by activating
MUSIC BROADCAST on the Center.
PORTABLE
➜
The icon disappears
28
SAME ARTIST
DBB
SEARCH
SMART EQ

5.6 Sound control

5.6.1 Equalizer

Equalizer enables you to select predefined sound
settings.
1
Press MENU to enter the menu screen
2
Use the navigation controls 3 or 4 and 2 to
select Equalizer.
3
Press 3 or 4 and 2 to select Rock, Pop (default),
Jazz, Neutral,Techno, Classical or Bass/Treble
4
Press OK (or 2) to confirm
To set Bass/Treble:
1
Press MENU to enter the menu screen
2
Use the navigation controls 3 or 4 and 2 to
select Settings
3
Press 3 or 4 and 2 to select Treble/Bass
4
Press 1 / 2 / 3 / 4 to select your option: Treble
(+3 to -3), Bass (+3 to -3)

5.6.2 Bass adjustment

●
Press DBB (Dynamic Bass Boost) once or more
times to select your option: DBB OFF (by
default), DBB 1, DBB 2 or DBB 3.
Helpful hint:
– Some discs might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce
the volume.