Cleaning And Maintenance; Miscellaneous - Medisana TM 750 Instrucciones De Manejo

Termómetro por infrarrojos
Ocultar thumbs Ver también para TM 750:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 73

4.1 Cleaning and maintenance

2
The sensor
thermometer TM 750. Protect it from dirt and damage. Clean the
sensor with a cotton bud dipped in warm water or 70% isopropyl
alcohol.
Do not immerse the thermometer in water or any other liquid. It is
not watertight.
To clean the thermometer, use a soft cloth slightly dampened with
mild soapy water or 70% isopropyl alcohol. Do not let water get into
the unit. Only use the unit again when completely dry.
Never use aggressive cleaning agents, thinners, benzine or tough
brushes.
Take care not to scratch the lens of the sensor, the display or the
housing.
Do not use or store the unit in an environment where the ambient
temperature or humidity is too high or too low (see operating condi-
tions in the "Technical specifications" section), in direct sunshine, in
the vicinity of static electricity or in a dusty environment.
Remove the batteries if you do not wish to use the unit for an exten-
ded period of time. Otherwise there is a danger that the batteries
may leak.
If the thermometer is used as described in these instructions, no
regular maintenance or calibration is required.
is the most delicate part of the MEDISANA Infrared

4 Miscellaneous

GB
g
g
g
g
g
g
g
29
Tabla de contenido
loading

Este manual también es adecuado para:

76140

Tabla de contenido