Gira 5490 Serie Manual De Instrucciones página 10

Módulo de superficie inalámbrico de 1 elemento para conmutación o regu­
lación
Deactivate wind alarm bright-
ness value
Priority, sun protection
Activate sun protection bright-
ness value
Deactivate sun protection brig-
htness value
Priority, twilight
Activate twilight brightness va-
lue
Deactivate twilight brightness
value
Switch off brightness overs-
hoot
Switch on brightness unders-
hoot
32582722 10864994
0...100 %
Basic setting: 0 %
0...4
Basic setting: 0
0...100 %
Basic setting: 100 %
0...100 %
Basic setting: 0 %
0...4
Basic setting: 0
0...100 %
Basic setting: 100 %
0...100 %
Basic setting: 0 %
On, Off
Basic setting: On
On, Off
Basic setting: Off
27.04.2017
Defines the behaviour of the
output on deactivating the
wind alarm. Only visible when
the priority for the wind alarm
is 0.
Specifies the priority for reca-
lling and removing a scene of
type Sun protection for the
channel.
Defines the behaviour of the
output on activating the sun
protection.
Defines the behaviour of the
output on deactivating the sun
protection. Only visible when
the priority for the sun protec-
tion is 0.
Specifies the priority for reca-
lling and removing a scene of
type Twilight for the channel.
Defines the behaviour of the
output on activating the twilig-
ht function.
Defines the behaviour of the
output on deactivating the twi-
light function. Only visible
when the priority for the twilig-
ht function is 0.
Allows automatic switch-off
according to the brightness. If
the parameter is On, then the
light controller switches off au-
tomatically when the bright-
ness setpoint is greatly excee-
ded.
Note: This parameter is not
yet active, as a light controller
has not yet been implemen-
ted.
Allows automatic switch-on
according to the brightness. If
the parameter is On, then the
light controller switches on au-
tomatically when the bright-
ness setpoint is greatly un-
dershot. We recommend only
using the parameter in con-
nection with the parameter
"Switch-off on brightness
overshoot".
Note: This parameter is not
yet active, as a light controller
has not yet been implemen-
ted.
10/15