Features; Assembly - Ryobi P2003 Manual Del Operador

PRODUCT SPECIFICATIONS
Motor ..........................................................................................................................................................................18 V DC
Cutting Swath ................................................................................................................................................................. 10 in.
Line Size ........................................................................................................... 0.065 in. diameter round or 0.065 in. twisted
KNOW YOUR STRING TRIMMER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
GRASS DEFLECTOR
The trimmer includes a grass deflector that helps protect
from flying debris.
UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the Packing
List are included.
WARNING:
Do not use this product if any parts in the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
PACKING LIST
String Trimmer/Edger
Grass Deflector Assembly with Screws
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.

FEATURES

HANDLE OVERMOLD
Handle overmold provides added user comfort.
LOCK-OUT BUTTON
The lock-out button prevents accidental starting.
TRIMMER/EDGER MODE
The lower end of the tool can be locked in two different
positions for edging and trimming.

ASSEMBLY

WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
ASSEMBLING THE TOOL
See Figure 2.
WARNING:
Never install, remove, or adjust the lower end of the tool
while the unit is running or with the battery pack installed.
Failure to stop the motor or remove the battery pack can
result in serious personal injury.
 Remove the battery pack if installed.
 Align the tab on the upper end of the tool with the slot
on the lower end of the tool.
 Depress the latches on each side of the upper end of the
tool.
 Insert the upper end of the tool into the opening on the
lower end of the tool. When the upper end of the tool is
fully seated, the latches will snap into place.
5 — English