Operation
14.4.1 Start (for ZI-STE2800 and ZI-STE5500)
To start the generator, proceed as follows:
Ensure that the generator is in a perfect condition.
When there are some devices connected with the AC sockets you have to disconnect them.
Open the fuel tap.
During a cold start close the choke lever, a warm start Choke open (ie
engine warm, eg by lower operating break)
Turn ON the engine switch.
Start the machine by pulling the starter handle.
If the choke lever is still closed, open it after a short warm-up phase.
(refer to the illustration)
ZIPPER MASCHINEN GmbH
ZI-STE2800; ZI-STE5500; ZI-STE800; ZI-STE8004
www.Zipper-Maschinen.at
OPERATION
39