Devices Are Connected To The Ac Terminals; Operation Of The Generator To Over 1800M Above Sea Level; Ac Operation - Zipper ZI-STE2800 Manual De Instrucciones

14.2.2 Devices are connected to the AC terminals

 Before connecting a device on the AC socket you must control the perfect condition of the device.
 When you recognize that a connected device acts unusual you must stop the generator and
disconnect the device. Control whether the device is damaged or if the generator was overloaded
by the device.
ATTENTION: A short exceed of the normed power capacity of the generator is possible but if this
happens oftener the life time of the generator will be shortened.
Please consider: Some devices, for instance cooling devices need up to 5 times more starting
current than current during the operation.

14.2.3 Operation of the generator to over 1800m above sea level

 When is operating at high altitudes is due to the lower oxygen content in the air, the air / fuel
mixture too dense. This leads to loss of power, increased fuel consumption and the rapid
deterioration of the spark plugs and heavy start the engine.
 the generator is designed to operate at high altitudes, you should modify the carburetor in a
certified service center. Nevertheless, it is a power drop of 3.5% per 300m altitudes to take
slope into account.
CAUTION: The operation of the generator with a modified carburetor at low altitude leads to
overheating of the engine.

AC Operation

Connect the devices to the AC socket. The most devices
need more power for starting than declared. A device with
a rated power (1500kW) can temporarily load your
generator (eg ZI-STE2800) to its maximum when switched
on.
Always connect the devices in a falling chronology of their
kW-consumption!
When the generator is overloaded the power supply gets
interrupted. So turn off the generator and study the
problem.
ZIPPER MASCHINEN GmbH
ZI-STE2800; ZI-STE5500; ZI-STE800; ZI-STE8004
www.Zipper-Maschinen.at
OPERATION
38