Setting The Initial Number And Auto Reset; Setting The Repeat Times Of Number - Amano PIX-200 Manual De Instrucciones

Setting the Initial Number and Auto Reset

In this setup, the number will automatically return to the initial number that
you have programmed at the desired time.
1. Unlock and remove the cover.
Press (+) and (E) button at the same time for 2 seconds.
The "set up program" display will appear.
2. Press the (+) button eight times to position the " " at the second
from the upper right corner.
3. Press (E) button and you will see "P1 nubEr initAL" display where
you can set the initial number. Press (E) button and you can select
the number by pressing (-) or (+) button. To move to the next digit,
press (E) button. Press (E) button to confirm your setting.
4. You will see "P2 Auto rESEt" display where you can set the auto
reset. Press (E) button and you can select "oFF" or "on" by
pressing (-) or (+) button. Press (E) button to confirm your setting.
5. When you select "on", the display will change to the clock display.
Press (-) or (+) button to set the hour and press (E) to move to the
minute. Press (E) button to confirm your setting.

Setting the Repeat Times of Number

In this setup, you can select the repeat times of number. This function
is useful when you need to imprint the same number on more than
one paper. (Repeat times can be set from 1 to 9)
1. Unlock and remove the cover.
Press (+) and (E) button at the same time for 2 seconds.
The "set up program" display will appear.
2. Press the (+) button nine times to position the " " at the third from
the upper right corner.
3. Press (E) button and you will see "No. rEPEAt" display where you can
set the repeat times of number by pressing (-) or (+) button.
Press (E) button to confirm your setting.
:
:
No.
15