Amano PIX-200 Manual De Instrucciones página 20

3. Press (E) button and you will see "P1 Print yEAr" display where you
can set the year digit. Press (E) again to change the year digit.
You can select either "2" digit or "4" digit by pressing (-) or (+) button.
Press (E) button to confirm your setting.
4. You will go to "P2 Print HYPhEN" display where you can set the
hyphen between month and date. Press (E) again to set the
hyphen. You can select either "oFF" or "on" by pressing (-) or (+)
button. Press (E) button to confirm your setting.
5. You will go to the "P3 Print Hour" display where you can set the
printing type of Hour. Press (E) again to change the printing
type of Hour. You can select either "12H" or "24H" by pressing
(-) or (+) button. Press (E) button to confirm your setting.
6. You will go to the "P4 Print minut" display where you can set the
printing type of Minutes. Press (E) again to change the printing type
of Minutes. You can select either "60", "100A", "100b(5/100)" or "10"
by pressing (-) or (+) button. Press (E) button to confirm your setting.
7. You will go to the "P5 Print LAngu" display where you can set the
kind of Language. Press (E) again to change the kind of Language.
You can select "English", "Spanish", "French", "German",
"Italian", "Portuguese", "roman", "123456" or "Japan" by pressing (-)
or (+) button. Press (E) button to confirm your setting. (Refer to the
"Diagram of Preprogrammed Comments & Languages" on page 24)
8. You will go to the "P6 Print ConEnt" display where you can set the
preprogrammed comment. Press (E) again to change the
preprogrammed comment. You can select from number "0" to "12"
by pressing (-) or (+) button. Press (E) button to confirm your setting.
Please refer to the number and comments below.
0
Option
Sample (Eng)
9. You will go to the "P7 SLASH ZEro" display where you can
set the type of Zero. Press (E) again to change the type of Zero.
You can select either "oFF" or "on" by pressing (-) or (+) button.
Press (E) button to confirm your setting. (Slash Zero on = Ø)
10. You will go to the "P8 LEAd ZEro" display where you can set the
print of Leading Zero. Press (E) again to change the setting.
12
1 2 3 4 5 6 7 8 9 10 11 12