Setting The Layout Of Customized Comments; Test Printing Of Customized Comments - Amano PIX-200 Manual De Instrucciones

How to Correct Customized Comments
Use below code to correct the customized
comments.
Code Meaning
Insert Character
Delete Character
End of the sentence
Sample of changing the font of "D" "E" "F" from One-Byte to Two-Byte
ABCDEFGHI 41, 42, 43, 44, 45, 46, 47, 48, 49
DEF
ABC GHI 41, 42, 43, in, J, 44, 45, 46, in, Jn, 47, 48, 49
How to delete the customized comment
When the print line number is blinking, (i.e. Prn LinE 1) press (+1 HOUR ) button for 3 seconds.
The blinking will stop and the line number will solidly light up. Once the printing length returns to 0
and the line number starts blinking again, the line you have selected and the lines afterwards will
be deleted.

Setting the Layout of Customized Comments

You can set the layout of Customized Comments to Right Aligned,
Centered or Left Aligned.
1. Follow step 1 and 2 on page 9, or continue the steps after 8 of
Setting the customized comments (p.9).
2. At the "P1 inPut CodE" display, press the (+) button and the display
will change to "P2 Print Layout" display. Press (E) to select
the layout.
3. Press (-) or (+) button to select the layout. You can select from
"Right", "Center" or "Left". Press (E) to confirm your setting.
4. You will go to the "P3 tEst Print" display which is explained below.

Test Printing of Customized Comments

1. After confirming the layout, press (E) to test print the customized comments.
10
How to Change the Font
Use below code to change the font of
the customized comments.
Code Meaning
Start Two-Byte
Undo Two-Byte
Start Emphatic Byte
Start Double-Width Byte
Undo Emphatic/Double-Width Byte
Undo Space character