Lcd Display; Print Position Adjuster (Slide Lever) - Amano PIX-200 Manual De Instrucciones

LCD Display

Ribbon Cartridge
Ink Capacity
The LCD Display contains an Ink Capacity gauge. This gauge indicates the amount of ink
remaining in the ribbon cartridge using four bar segments, from E (Empty) to F (Full).
The PIX-200 calculates the ink capacity of the ribbon cartridge from the number of imprints made.
As the ink capacity decreases, the bars in the gauge will disappear. When the ribbon reaches
below 25% capacity, the word "INK" and "E" will blink until the ribbon is replaced and the ink
counter is reset. (Refer to page 22 for Ribbon Cartridge Replacement and Ink counter reset)

Print Position Adjuster (Slide Lever)

Print position from the paper edge is adjustable by pressing and sliding the print position adjuster
(slide lever) located at the right outside bottom of the unit. The slide lever can be adjusted using
the latching function that moves 17 steps by 1.5mm (Total 25.5mm). This adjuster will move the
paper-detecting sensor forward or backward and change the margin from the paper edge to the
print.
4
Day of the week / Program Indicator
Program Indicator
Atomic Time Synchronization Indicator
Date (Year, Month, Date) / Number /
Repeat Times
AM/PM Indicator
Time (Hour: Minute:Second)/Programming
Bottom View
Print Position Adjuster