Basic Settings; Mechanical Footrests - B+B Triplex Manual De Instrucciones

TRIPLEX
| Electric Wheelchair
3.3. Contents
After receipt of the goods, please check the contents for completeness
right away. The contents consist of:
• outer package
• electric wheelchair (ready for use incl. 2 batteries)
• VR2 control system (R-Net with electrical adjustable components)
• charging unit
• seat cushion
• instruction manual
3.4. Summary
push handles
backrest
control unit
arm rest
side part
seat cushion
lights
Indicator light
drive wheel
foot rest
steering wheel
44

3.5. Basic settings

It is necessary to adjust the wheelchair to your body size before first use.
This is the only way to ensure a physiologically correct posture allowing
for long drives without tiring. Below you find a description of the basic
settings of the wheelchair. You should carry out these adjustments with
the help of your medical supply dealer. You need a set of 4 mm, 5 mm
and 6 mm Allen keys, a screw driver and ring spanners, 10 and 13.

3.5.1. Mechanical footrests

Length of lower leg supports
• The lower leg supports can be adjusted from 47 to 55 cm.
• To do so, loosen the two allen screws.
• Adjust to the desired height.
• Tighten the screws again. Use medium-strength Loctite to lock
screws in place.
Make sure to always use two screws for secure
fastening!
Angle of footrest
• The angle of the footrests is adjustable in 25° steps.
• Loosen the screwing at the side of the footrest.
• Adjust to the desired angle.
• Tighten the screw again. Use Loctite 243 to lock screw in place.
Make sure to set the angle only within the marked
range!
01
Bischoff & Bischoff GmbH | 01.06.2019
TRIPLEX
Electric Wheelchair |
02
03
45