Front Panel (Mixer, Reverb Section) - ARP 2600 FS Manual Del Usuario

Front panel (MIXER, REVERB section)

INITIAL OSCILLATOR FREQUENCY INITIAL OSCILLATOR FREQUENCY
i
g
f
e
d
c
j
l
h
k
o
n
p
a b
m
MIXER
a . Input 1 jack
This is the mixer input jack. The
VCF output is internally connected.
b . Input 2 jack
This is the mixer input jack. The
VCA output is internally connected.
c . Input level 1 slider
Adjusts the audio signal level of
mixer input 1.
d . Input level 2 slider
Adjusts the audio signal level of
mixer input 2.
e . Audio output 1 jack
This jack outputs an audio signal
that is adjusted by c. Input level 1
slider.
f . Audio output 2 jack
This jack outputs an audio signal
that is adjusted by d. Input level 2
slider.
g . L/R input jack
This is an input for the audio signal
that is output to both the left and
right channels. The mixer output is
internally connected.
h . PAN slider
Adjusts the panpot (left/right
volume balance).
i . LEFT INPUT jack
This is the input jack for the left
channel of the mixer.
j . LEFT OUTPUT jack
This jack outputs an audio signal
that sums the output of the spring
reverb adjusted by n. with the input
from the LEFT INPUT jack.
- 13 -
k . RIGHT INPUT jack
This is the input jack for the right
channel of the mixer.
l . RIGHT OUTPUT jack
This jack outputs an audio signal
that sums the output of the spring
reverb adjusted by o. with the input
from the RIGHT INPUT jack.
REVERB
m . Input jack
This is the input jack for the
spring reverb. The mixer output is
internally connected.
n . Level slider L
Adjusts the level of the LEFT signal
that is input to the spring reverb.
o . Level slider R
Adjusts the level of the RIGHT
signal that is input to the spring
reverb.
p . REVERB OUTPUT jack
This is the output of the spring
reverb. If a patch cable is connected
here, the reverberated signal from l.
is no longer output.