Switching On And Off; Remote Control - Monacor PA-2460CD Manual De Instrucciones

GB 3 Applications
This CD player has especially been designed for
applications in PA systems. It can e. g. be used
for playing background music and is equipped
with a 6-fold CD magazine for uninterrupted
music replay.
It is possible to replay audio CDs, CDs you
have burnt yourself (audio CD-R), and CDs with
titles in the MP3 format and WMA format. How-
ever, problems may occur when playing re -
writable CDs (CD-RW), depending on the type of
CD, the CD burner and the burning software
used.
4 Placing and
Connecting the CD Player
The PA-2460CD is provided for mounting into a
rack for units with a width of 482 mm (19") but it
can also be used as a tabletop unit. For rack
installation 2 rack spaces (rs) are required =
89 mm.
Prior to the connection of units or changing exist-
ing connections switch off the CD player and the
units to be connected.
1) For connection to the following unit (e. g.
amplifier, mixer) different connection possi-
bilities for the audio output are available at
the CD player:
1. coaxial digital output (26)
2. optical digital output (27)
3. analogue stereo output via the RCA jacks
(28)
4. analogue stereo output via the XLR con-
nections (29)
5. analogue mono output via the XLR con-
nection (30)
Connect the matching output to the audio
input of the following unit.
2) For continuous operation of the CD player in
case of power failure connect a 24 V emer-
gency power supply unit (e. g. PA-24ESP
from MONACOR) to the screw terminals DC
INPUT (25).
3) For remote control of the CD player via a
computer, connect the computer to the jack
RS-232C IN (31). See chapter 6. For remote
control of another unit, connect this unit to the
jack RS-232C OUT.
4) Finally connect the supplied mains cable to
the mains jack (24) first and then to a mains
socket (230 V~ / 50 Hz).
5 Operation

5.1 Switching on and off

1) Switch on the unit with the POWER switch
(11). The indication STAND-BY (12) disap-
pears and the display (19) shortly shows the
version number of the firmware.
2) The CD player searches in the magazine (22)
for the first CD inserted. If at least one CD is
in the magazine, the replay starts automati-
cally. If the display shows "NO MAGAZINE",
the magazine has not been inserted.
3) After operation switch off the CD player with
the POWER button. However, it is not com-
pletely switched off but in stand-by mode (the
indication STAND-BY lights up) and has a
low power consumption.
8
5.2 Inserting CDs into the magazine
G
The magazine (22) is only suitable for stand -
ard CDs (∅ 12 cm). Single CDs (∅ 8 cm) can-
not be inserted.
G
Carefully handle the magazine. Do not drop it
and do not expose it to direct sunlight. Protect
it against high temperatures. Petrol, thinner
or other chemicals containing solvents attack
the magazine.
1) Open the sliding door (13) to the right so that
the magazine compartment is accessible.
2) To eject the magazine, press the button
EJECT (21). For this purpose, the CD player
must be switched on.
3) Insert up to six CDs into the magazine. For
this purpose, pull out the desired CD tray
from the magazine with the corresponding
handle (23). Insert the CD with the lettering
showing upwards and push the tray back into
the magazine.
4) Insert the magazine in direction of the arrow
(also see fig. 4) into the compartment until it
locks into place. Close the sliding door of the
compartment so that it is protected against
dust.
5) The CD player checks the magazine (indica-
tion "Check disc ...") and starts the replay.

5.3 Remote control

To insert or change the battery, on the rear side
of the remote control push the small bar with the
groove to the left and remove the battery support
at the same time.
1.
2.
A 3 V button cell of type CR2025 is required.
When inserting, make sure that the positive pole
of the button cell shows upwards.
If the remote control is not used for a longer
period of time, remove the battery so that the
remote control will not be damaged if the battery
should leak.
Do not put exhausted batteries into the
household rubbish but take them to a
special waste disposal (e. g. collective
container at your retailer) for a disposal
which is not harmful to the environment.
When actuating a button, always hold the remote
control in the direction of the sensor (2). There
must be no obstacles between the remote con-
trol and the sensor.
5.4 Replaying all CDs in the magazine
After switching-on, the unit searches in the mag-
azine for the first CD inserted (indication "Check
disc ..."). When a CD has been found, the dis-
play shortly shows the number of the titles (i) and
the total playing time (j).
The replay starts automatically and the dis-
play shows the replay symbol
number (i) and the time already played of the title
(j). With the button TIME (6) it is possible to
shortly switch back to the indication of title num-
ber and total CD playing time. The number of the
current CD can be read from the magazine indi-
cation (d) of the display (fig. 2 shows CD No. 2
as an example).
1) Adjust the volume with the LEVEL control (1).
2) To interrupt the replay, press the button
(8). The display shows the pause symbol (c).
To replay the CD, press the button
The replay may also be interrupted with
the button MUTE (17). The display shows
"MUTE" (a). To continue the replay, press the
button MUTE once again.
3) The display shows the number of the current
title behind "Tr" (i). To go to another title,
either enter the title number with the numeri-
cal keys (18), e. g.:
No. Buttons
7 0, 7
20 2, 0
99 9, 9
or use the buttons
and T-UP)*:
button to select the next title
button to go to the beginning of the title
currently playing. Each time the button is
pressed, the unit goes back one title.
4) When titles in the MP3 format are filed in dif-
ferent folders, it is possible to select another
folder with the button FOLDER (5). Then the
first title of the folder selected starts.
5) For fast forward or reverse on the CD, shortly
press the button
the MP3 format fast forward and reverse can-
not be followed acoustically but only by
means of the time indication (j) of the display.
To stop fast forward or reverse, press the but-
ton .
6) To change to the next CD in the magazine at
any time, press the button
button it is possible to change to the previ-
ous CD. During changing, the display shows
"Change disc ...".
7) The magazine is replayed repeatedly without
interruption. After it has completely been
replayed for the first time, the magazine indi-
cation (d) shows which trays contain a CD.
For these trays the CD number is shown.
Trays without number are empty and are
skipped when playing the magazine once
again.
To stop the replay, press the button
For restarting, press the button
5.5 Repeated playing of a title or a CD
1) For repeated playing of the current title, press
the button REPEAT [RPT]* (15). The display
shows the indication REPEAT 1 (e).
2) To repeat all titles of the current CD, press
the button REPEAT [RPT] a second time.
The display indicates REPEAT DISC.
3) To stop the repeat function, press the button
REPEAT [RPT] again. The function is also
deactivated when pressing the button RAN-
DOM [RDM]* (14) or INTRO [SCN]* (16) or
when selecting another title.
5.6 Playing the titles of a CD
in a random order
(b), the title
Press the button RANDOM [RDM]* (14) once.
The indication RANDOM (g) is displayed. The
unit goes to a title selected at random and then
replays the titles of the CD currently playing in a
random order until the function is switched off.
To deactivate the random replay, press the
button CLEAR (4). The function is also deacti-
vated when actuating the button REPEAT
[RPT]* (15) or INTRO [SCN]* (16).
* Lettering on the remote control
again.
and ( T-DN
or (20). For titles in
(7). With the
(10).
.