Metabo HPT C 10FSHC Manual De Instrucciones página 36

English
Lower guard
Cover plate
8 mm bolt
Fig. 44-c
WARNING:
CAUTION:
2. Mounting the saw blade
WARNING:
(1) Install a 10" (255 mm) blade with arbor, making sure the rotation arrow on the blade
matches the clockwise rotation arrow on the lower guard, and the blade teeth are
pointing downward.
(2) Place washer (B) against the blade. Thread the 8 mm bolt on arbor in a counterclockwise
direction.
36
Cover plate
screw
Washer (B)
8 mm bolt
Fig. 44-a
Washer (B)
Blade end
spanner
When mounting the saw blade, confi rm that the rotation indicator
mark on the saw blade and the rotation direction of the lower
guard (see Fig. 1) are properly matched.
* Confi rm that the spindle lock has returned to the retract position
after installing or removing the saw blade.
* Tighten the 8 mm bolt so it does not come loose during operation.
Confi rm the 8 mm bolt has been properly tightened before the
power tool is started.
Unplug the miter saw before changing/installing the blade.
Spindle lock
Blade
Washer (B)
8 mm bolt
Fig. 44-b
Washer (A)
Fig. 44-d