Accessories; Applications; Standard Accessories - Hitachi C 8FSHE Manual De Instrucciones

English
When cutting the workpiece which has the dimension of "*" there might be some possibility of the lower
end of the circular saw to touch with the workpiece, even if the motor head is located at the lower limit
position. Pay attention when cutting the workpiece. For further details, refer to "PRACTICAL APPLICATIONS"
on page 18. Mount the auxiliary board on the fence surface (Refer ( ) the thickness of auxiliary board). Refer
to "5. Cutting large workpieces" on page 20 (Fig. 27).

ACCESSORIES

WARNING:
Accessories for this power tool are mentioned in this Instruction Manual.
The use of any other attachment or accessory can be dangerous and could cause injury
or mechanical damage.

STANDARD ACCESSORIES

1 8-1/2" (216mm) TCT Saw
blade (1 piece)
No. of teeth 24
Code No. 998840 (C330274)
OPTIONAL ACCESSORIES...
1 Extension Holder and Stopper (Code No. 321553)
2 Saw blade 8-1/2" (216mm) TCT Saw blade (Total teeth: 36) (Code No. 998860)
3 Saw blade 8-1/2" (216mm) TCT Saw blade (Total teeth:60) (Code No.998862)
4 Saw blade 8-1/2" (216mm) TCT Saw Blade for aluminum (Total teeth: 60) (Code No.998864)
5 Crown molding Vise Ass'y (Code No. 329782) (Include Crown molding Stopper (L))
6 Crown molding Stopper (L) (Code No. 321374)
7 Crown molding Stopper (R) (Code No. 321373)
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.

APPLICATIONS

Wood and aluminum sash.
10
2 Dust bag (1 piece)
For how to use, refer to
page 25.
3 Vise Assembly w/knob bolt
(1 piece)
For how to use, refer to
page 18.
Fig. 3
sold separately
4 10mm BOX wrench
(1 piece)
5 Holder (1 piece)
For how to use, refer to
page 15.
6 Side handle (1 piece)