GLIDEAWAY ECOFLEX Comfort Base Manual De Instrucciones página 9

ASSEMBLY - BASE
6
Connect the Foot motor connector cable
to the Head motor connector cable.
Note: The Head and Foot motors are
labeled on the respective motor.
When setting up a Split Cal King or two
Twin XL beds to form a King, refer to the
instructions on page 15 in Part B on how
to link your remote.
7
Insert one end of the DC cord into the
power supply.
To Motor
8
Insert the AC cord into the power supply.
9
10
8
IMPORTANT: DO NOT PLUG THE
BASE INTO THE AC OUTLET YET.
Remove the Mattress Retainer Bar
from the bottom of the base. Finish
removing the plastic packaging
from the base to orient into inal
position. Carefully rotate the base on
its side, then lift and place on legs.
IMPORTANT: DO NOT LEAN THE BED
AGAINST THE INSTALLED LEGS TO
TURN OVER.
Insert the Mattress Retainer Bar into
the two holes at the Foot Base Bar.
Secure with the included clips as
shown.