Safety Instructions - cecotec CONGA 5090 Manual De Instrucciones

2. SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the appliance.
Keep this instruction manual for future reference or new users.
• This product must be used in accordance with the directions
in this instruction manual. Cecotec cannot be held liable or
responsible for any damages or injuries caused by improper
use.
• Make sure that the mains voltage matches the voltage
stated on the rating label of the appliance and that the wall
outlet is grounded.
• This product can only be disassembled by qualified
personnel.
• Do not touch wires, power supplies or power adapters with
wet hands.
• Keep the robot away from clothing, curtains and any other
similar materials.
• Do not sit or place heavy or sharp objects on top of the
appliance.
• Do not operate the appliance close to heat sources,
flammable substances, wet surfaces where it can fall or
be pushed into water or allow it to come into contact with
water or other liquids. Do not operate outdoors.
• Do not use the charging base if it has a damaged cord or
plug or if it is not operating properly. In case of fault or
malfunction, contact the official Technical Support Service
of Cecotec.
• Do not operate the device on tables, chairs or other high
surfaces where it could fall.
• Do not use the laser protection as a handle to move the
robot.
• Do not operate the product in places where temperature is
below 0 ºC or above 40 ºC.
• The appliance can only be operated with the supplied
ENGLISH
29