Preparation For Use; Legal Information - Ottobock 60X1 Instrucciones De Uso

5) When the dialogue window informing you that the driver has been installed successfully
appears, click the Finish button.
6) Connect the plug of the USB fibre optics adapter to the USB port on the computer.
→ The green LED on the USB fibre optics adapter lights up.
7.3 Installation in Windows 8
Close all open applications.
1) Insert the enclosed CD into the CD or DVD drive.
2) Open "Computer" with the key combination [Windows logo key
3) Right-click the CD drive in the right-hand window.
4) Left-click the menu item "Install or run program".
→ Follow the subsequent instructions of the installation wizard.
INFORMATION: When the dialogue window stating that "Otto Bock Healthcare
Products GmbH" is the publisher of the software appears, continue the installation by
clicking the corresponding button.
1) Follow the subsequent instructions of the installation wizard.
2) When the dialogue window informing you that the driver has been installed successfully
appears, click the Finish button.
3) Connect the BionicLink PC plug to the USB port on the computer.
→ The green LED on the USB fibre optics adapter lights up.
7.4 Installation in Windows 10
Close all open applications.
1) Insert the enclosed CD into the CD or DVD drive.
2) Open "Computer" with the key combination [Windows logo key
3) Right-click the CD drive in the left window.
4) Left-click the menu item "Install or run program".
→ Follow the subsequent instructions of the installation wizard.
INFORMATION: When the dialogue window stating that "Otto Bock Healthcare
Products GmbH" is the publisher of the software appears, continue the installation by
clicking the corresponding button.
1) Follow the subsequent instructions of the installation wizard.
2) When the dialogue window informing you that the driver has been installed successfully
appears, click the Finish button.
3) Connect the plug of the USB fibre optics adapter to the USB port on the computer.
→ The green LED on the USB fibre optics adapter lights up.

8 Preparation for use

1) Connect the fibre optics cable to the socket on the adapter. Observe the plug direction.
2) Connect the other end of the cable to the product being controlled.
3) Launch the software for the product to be controlled and establish the connection between
the product and the PC.
INFORMATION: For details about the installation, establishing the connection, and
use, please consult the instructions for use of the products connected to the adapter.
→ A correctly established connection is indicated by the flashing red LED.

9 Legal information

All legal conditions are subject to the respective national laws of the country of use and may vary
accordingly.
16
+E].
+E].