Chicco hoopla Instrucciones De Uso página 13

Ocultar thumbs Ver también para hoopla:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
safety harness (Fig. 12).
BOOSTER CUSHION
10. T he reducer cushion D - DD is ideal from birth and can be re-
moved according to needs. To fix it to the seat, place it on the
seat and slide the crotch strap through the hole (Fig. 13). Thread
the safety harness in the relative side slots of the reducer cushion
(Fig. 13 a).
Position the headrest DD at the desired height; it can be chosen
within three different heights; fix the headrest to the seat, sliding
the straps through the slot and close it again using the velcro strap
(Fig. 14).
TOYBAR
11. F asten the toybar (E) to the frame inserting the lower ends in
the relevant fastening holes of the bar support (Fig. 15). WARN-
ING! Always check that the toybar is properly fastened before
every use.
12. T he toys can be fixed to the toybar inserting the upper ends in the
relevant holes in the fabric bar (Fig. 16). A different fastening point
can be chosen for each toy. The toys can also be inserted in the two
w-
slider rings " F" on the arcs of the toybar (Fig. 17): the SlideLine system
lets you slide the toys along the arc and to change the play scenarios
en
whenever you want.
ake
HOW TO REMOVE THE FABRIC COVER
he
It is possible to remove the seat cover and the booster cushion from the
reclined cradle to wash them.
13. R emove the booster cushion (Fig. 18).
14. R emove the safety harness from the slots in the fabric and start
to remove the cover from the front. Release the 4 click buttons
ed
Q at the side under the metal tubes (Fig. 19), remove the Velcro
rd,
strap under it (Fig. 20 and 20A), then take off the fabric through
hin
the entire frame paying attention not to damage it. To refit the
out
cover, proceed in reverse order, making sure that the lower fabric
be
strap goes through the adjustment joints of the backrest (Fig. 21)
and the toybar supports.
ust-
* T he theme of the detachable toys varies depending on the se-
on,
lected set.
use.
10/12 M, up to 18 Kg
of
(CHAIR USE)
on
• A ge range intended for use: from
when your child starts walking and
of
is able to sit down and stand up by
un-
.
himself (about 10/12 months, max.
18 kg).
• WARNING: Before using as a chair,
hild
os-
remove the safety harness (crotch
ont
strap and waist belt) and position
. 9)
them in the relevant spaces.
• WARNING: Never leave the child
unattended.
ou
• P lace only on flat and stable surfaces.
wo
• D o not use the product as a chair in
ss-
in
rocker mode.
• T he dimensions of the product are
ss-
80 x 43 x 32/62 cm.
elt
he
• WARNING: Check that the space in
which chair will be used is free of ob-
jects or furniture that may obstruct
or compromise the correct use.
• D o not let your child stand up on
the chair to avoid the risk of falling.
• D o not allow more than one child at
a time to sit on the chair so as not to
compromise its stability.
• T his chair is intended solely for
household use and on dry surfaces.
• D o not make any modifications:
any modification may prejudice
its safety.
• P rolonged exposure to direct sun-
light can cause the fabric to fade.
After prolonged exposure to high
temperatures, wait a few minutes
before using the product.
• N ever move the chair while the child
is seated on it.
REMOVING THE RESTRAINT SYSTEMS
• P ass the waist belt through the holes in the backrest (Fig. 22) and
then through the D-shaped rings behind the backrest. Keep the
belt out of reach of children.
• P ass the crotch strap in the relevant hole R (Fig.23) in the seat and
place it in the relevant pocket, as shown in Fig. 24.
If you need to fit the restraint systems again (to use the product as a
reclined cradle), repeat these steps in reverse order.
If necessary, adjust the belts depending on your child's size.
WARRANTY
The product is guaranteed against any conformity defect in normal
conditions of use as provided for by the instructions for use. The war-
ranty shall not therefore apply in the case of damages caused by im-
proper use, wear or accidental events. For the duration of warranty on
conformity defects please refer to the specific provisions of national
laws applicable in the country of purchase, where provided.
13
Tabla de contenido
loading

Tabla de contenido