Fracarro KSTT Instrucciones De Funcionamiento página 24

SERVICE LIST – To visualize the list of available channels inside the selected transponder. Scrolling the channel
list with the TPE, it is possible to:
• Add a program to the channel list in transmodulation (an asterisk "*" will appears on the second row of the
TPE for the selected program),
•
Remove a program from the output channel list for the transmodulation.
• On the screen, it shows the features of the selected channel: name, programme type and ID service,
• Displays the bit rate used by the programme and the remaining bit rate still available.
CHANNEL OUT LIST – manages the outgoing cannels; scrolling the channel list with the TPE programmer, the
following is possible:
• choose the programme position,
• remove the programme from the channel list,
• enable/disable the LCN manual setting,,
• manually set the programme numeration.
SET THE LIST OUT TO ZERO – set the outgoing programme list to zero.
COFDM
(OUTPUT)
Select the Forward
Error Correction
Select the guard
interval
Select the number
of c arriers
Select the
constellation type
Select the
spectrum type
Select the output
level
Select the singletone
8.6 COFDM (OUTPUT) MENU
Select the output
frequency
SEL. BY
OUTPUT FREQ.
SEL. BY
CHANNEL
FEC 1/2
GUARD INTERVAL 1/4
CARRIERS NUM.
CONSTELLATION QPSK
SPECTRUM NORMAL
LEVEL OFF
SINGLETONE OFF
Confirm the settings by pressing the
pressing the S key after the modules programmation.
BANDWIDTH
FREQ.
FREQUENCY (MHz)
COUNTRY
OUTPUT
CHANNEL
1/2, 2/3, 3/4, 5/6, 7/8
7/8
1/4, 1/8, 1/16, 1/32
1/32
2K 8K
QPSK, 16QAM, 64QAM
64QAM
INVERTED
OFF, 0, 1, 2, .., 15
15
ON
key; save the settings by
24
6 MHz
7 MHz
8
6
8 MHz
111 862
Europe
France
Europe
UK
Australia
S2-E69
S2 E69