Programming Instructions; Default Parameters - Fracarro KSTT Instrucciones De Funcionamiento

The programming of the KCPN converter should be carried out using a TPE programmer by connecting it to the
converter's RJ45 outlet.
The menu item can be highlighted by scrolling with the
Press or to enter the required menu.
Press the keys to scroll through the values in the menu item.
Press the key to save the set configutation.
IMPORTANT: Press the TPE
the last modifications, the set data will be lost.
Press the key to leave the menu without saving modification.
In order to program and interpret the programming menu shown in the flow-charts, please refer to the following
tables:
TPE keys
4
8
......
0
S
Graphic indications of
the menu diagrams
The KSTT module can be restored to the original factory settings (default parameters). To set these parameters,
refer to the TPE GENERAL MENU (HEADEND SETUP --> FACTORY SETUP).
Satellite
INPUT
HOTBIRD 13°E
Output chan-
nel
OUTPUT
E21
(474,00MHz)

6. PROGRAMMING INSTRUCTIONS

key to save the settings. If this key is not pressed within 5 minutes from
Used to confirm an entered value or to select a menu
Used to cancel an entered value or exit a menu
9
Select the menu by the
Scroll the menu to the right
Scroll the menu upwards
Scroll the value to the right

7. DEFAULT PARAMETERS

Program DiSEqC
BBC WORLD,
EURONEWS
Country FEC
EUROPA
keys.
Key Function
Used to scroll the menu items
Used to enter values
Used to save the modifications
Meaning
or keys and exit with the
or to the left
or downwards
or to the left
LNB
A 14V/22KHz
Guard interval
7/8 1/32
20
key
Freq.
Symbol Rate
IF MHz
1997 27500
Carriers Constellation
8K 64QAM