Image Playback; Connecting The Camera To A Computer; Further Information; Storage - MINOX DTC 395 Manual De Instrucciones

7. Image playback

Once your camera has recorded images, you can view these
using the "Playback" option. You will first need to set the
camera to "SETUP" mode. Now press the "Replay" button and
you'll be able to view the photos and videos that your camera
has recorded. You can browse through these using the arrow
buttons. Press the "OK" button to start and stop playback of
videos.
Press the "Menu" button during "Playback" mode if you wish
to delete selected photos or videos. You also have the option
of deleting all recorded photos and videos at once. For safe-
guarding purposes, it will be necessary for you to select these
options again before they become effective.
Press the "Replay" button to stop playback.

8. Connecting the camera to a computer

Your MINOX DTC 395 saves your photos and videos in a
folder named "DCIM/100Media" on your SD card. Photos
have the file ending ".jpg" and videos ".avi".
There are two possibilities to transfer the files to your PC:
either you remove the SD card and insert it into a card
reader or you connect the DTC 395 to your PC with the USB
cable included in the scope of delivery.
Transferring your files via USB cable
Always ensure that the camera is switched off before connec-
ting it to a computer. Connect your camera to the computer
using the USB cable (included in the scope of delivery) via the
USB port. Switch the camera to TEST mode (main switch in the
middle). The camera will now be recognized as a removable
storage device. Your photos and videos can now be copied to
a folder on your PC.
46
Transferring your files via SD card
Always ensure that the camera is switched off before the
SD card is removed from the camera, otherwise the files on
your memory card could be damaged. Remove the memory
card from the slot and insert it into the card reader connected
to your computer. Some computers also have an internal slot
for SD cards - in this case, insert the SD card directly into the
slot on your computer. Your photos and videos can now be
copied to a folder on your PC.
Connection to the TV
To connect to the TV, set the MINOX DTC 395 to SETUP mode
and then connect the USB cable to the camera. Connect the
other end of the cable to the TV. Then select the appropriate
video input source on the TV set for the USB input you are
using.

9. Further information

Storage

If you will not be using your MINOX DTC 395 for an extended
period of time, remove the batteries and store the camera in
a cool and dry place.

Disposal

The packaging should be disposed of in a clean and environ-
mentally safe manner. Batteries must not be disposed of in
the household waste. The consumer is legally obliged to return
dead batteries at designated collection points or at the retailer
where the batteries were purchased.
47