Volume Adjustment - Chorus Gewiss GW 18 301 Manual De Instrucciones

INSTALLATION INSTRUCTIONS

Volume adjustment

The audio/video module leaves the factory with the volume already set to guarantee
suitable communication in most cases.
In particular cases where this setting is not suitable, the audio/video module volume
can be changed as follows:
1. Open the module holder frame if necessary.
2. Adjust the volume, using a small Phillips screwdriver to gently turn the potentio-
meter located behind the audio/video module. Turn the potentiometer clockwise
to increase the volume or anticlockwise to decrease the volume.
ATTENTION: the potentiometer only adjusts the audio/video module
speaker; the sensitivity of the microphone will not change. To change
the volume of the apartment units, adjust their volume settings.
3. Reclose the module holder frame.
59