Warnings For Installation; Assembling The Module On The Module Holder Frame - Chorus Gewiss GW 18 301 Manual De Instrucciones

INSTALLATION INSTRUCTIONS

1. The audio/video module is connected to a LAN port (standard or PoL) of the
Ethernet Switch (GW 18 371) using a UTP LAN network cable cat. 5e or higher (see
paragraph Connection layout).
2. When connecting directly to the apartment unit (single-family building, only one
video entryphone) the connection between the two devices must be made using
an indirect UTP LAN network cable cat. 5e or higher (see the Connection diagram
paragraph).
3. The length of the LAN network cable may not exceed 100 metres.
4. The length of the power supply cable between the audio/video module and the power
supply may not exceed 100 metres (conductors section 1 mm
5. The length of the connection cable between the audio/video module and the outdoor
push-button (optional) may not exceed 40 metres (conductors section 1 mm
6. The length of the connection cable between the audio/video module and the electro-
lock may not exceed 50 metres (conductors section 1 mm
7. The length of the electric load cable connected to the relay output (optional) may
not exceed 50 metres (conductors section 1 mm
8. For the relay output, do not exceed 24 V and a current of 3 A.
ATTENTION: do not connect the PC directly to the audio/video module
because it could be damaged.


Assembling the module on the module holder frame

Warnings for installation

Assembly
46
).
2
).
2
).
2
Fix the audio/video module on the
module holder frame (GW 18121,
GW 18122 or GW 18123) using the
provided screws.
The audio/video module must occupy
the highest position, except for the
cases in which the street number
module is also installed on the same
frame. In this case, it is recommended
to install the audio/video module just
below it.
).
2