Usb Device - Sony HT-CT390 Manual De Instrucciones

 Make sure that the power indicator
on the subwoofer is lit in green. If
not, refer to "No sound is heard
from the subwoofer." in "Subwoofer
wireless sound" (page 26).
 A subwoofer is for reproducing bass
sound. In the case of input sources
that contain very little bass sound
components (i.e., a TV broadcast),
the sound from the subwoofer may
be difficult to hear.
 When you play content compatible
with copyright protection
technology (HDCP), it is not output
from the subwoofer.
The surround effect cannot be
obtained.
 Depending on the input signal and
the sound field setting, surround
sound processing may not work
effectively. The surround effect may
be subtle, depending on the
program or disc.
 To play multi channel audio, check
the digital audio output setting on
the device connected to the system.
For details, refer to the operating
instructions supplied with the
connected device.

USB device

The USB device is not recognized.
 Try the following:
 Turn the system off.
 Remove and reconnect the USB
device.
 Turn the system on.
 Make sure that the USB device is
securely connected to the
port.
 Check if the USB device or a cable is
damaged.
 Check if the USB device is on.
 If the USB device is connected via a
USB hub, disconnect it and connect
the USB device directly to the Bar
Speaker.
BLUETOOTH device
BLUETOOTH connection cannot be
completed.
 Make sure that the blue LED
indicator is lit (page 7).
 Make sure the BLUETOOTH device
to be connected is turned on and
the BLUETOOTH function is
enabled.
 Move the BLUETOOTH device closer
to the Bar Speaker.
 Pair this system and the
BLUETOOTH device again. You may
need to cancel the pairing with this
system using your BLUETOOTH
device first.
Pairing cannot be done.
 Move the BLUETOOTH device closer
to the Bar Speaker.
 Make sure this system is not
receiving interference from a
wireless LAN equipment, other
2.4 GHz wireless devices, or a
microwave oven. If a device that
generates electromagnetic
radiation is nearby, move the device
away from this system.
 Pairing may not be possible if other
BLUETOOTH devices are present
around the Bar Speaker. In this case,
turn off the other BLUETOOTH
devices.
No sound is output from the connected
(USB)
BLUETOOTH device.
 Make sure that the blue LED
indicator is lit (page 7).
 Move the BLUETOOTH device closer
to the Bar Speaker.
25
US