Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Spark
Attester
Service
Your engine is not factory-equipped
with a spark
arrester. In some areas, it is illegal to operate an
engine without a spark arrester. Check local laws and
regulations. A spark arrester is available from your
nearest Sears service center. If you need to order a
spark arrester, please ca[[ 1-800-366-PART.
The spark arrester must be serviced every 50 hours to
keep it functioning as designed.
If the engine has been running, the muffler will be very
hot. Allow the muffler to cool before servicing spark
arrester.
•
Remove spark arrester screen for cleaning and
inspection.
•
Replace if screen is damaged.
Air Cooling
System
Over time debris may accumulate in cylinder cooling
fins and cannot be observed without partial engine
disassembly. For this reason, we recommend you have
an authorized Sears service dealer clean the cooling
system per recommended intervals (see "Maintenance
Schedule" on page 13). Equally important is to keep top
of engine free from debris. See "Clean Debris".
Keep areas within heavy line clear of debris.
DO NOT touch
hot surfaces
and avoid hot exhaust
gases.
Allow
equipment
to cool before touching.
The pressure
washer
must be at least 5 feet from
structures
having
combustible
walls
and/or
other
combustible
materials.
Keep
at least 3 feet of clearance
on all sides of pressure
washer
for adequate
cooling,
maintenance
and servicing.
Reflective
exhaust
heat may damage
fuel tank causing
fire.
Code of Federal
Regulation
(CFR)
Title 36 Parks,
Forests,
and Public
Property
require
equipment
powered
by an internal
combustion
engine
to have a spark
attester,
maintained
in effective
working
order,
complying
to USDA
Forest
service
standard
5100-1C
or later
revision.
In the State of California
a spark
attester
is
required
under section
4442
of the California
Public
resources
code.
Other
states
may have similar
laws.
Clean Combustion
Chamber
We recommend you have an authorized Sears service
dealer remove combustion deposits from the cylinder,
cylinder head, top of piston and around valves per
recommended intervals (see "Maintenance Schedule"
on page 13).
17
Tabla de contenido
