Disposing Of Machine; Waste Disposal - Silca BravoIII Manual De Instrucciones

Operating manual - English
8

DISPOSING OF MACHINE

To dispose the machine, it must be rendered unusable by carrying out the operations listed below:
- deactivation of the electricity supply;
- separation of the plastic and metal parts;
When these operations have been carried out, the machine can be disposed of according to the current
regulations in the country of use.
W D
ASTE ISPOSAL
• Waste deriving from cutting operations
Although residue coming from the key-cutting operations is classified as special waste, it is included in
solid urban waste (SUW) as metal wool.
• Cutting machine
The BRAVO III with EZ-Jaw key-cutting machine is designed for many years of operation and is also
re-usable. Re-cycling is a recommended ecological practice.
• Packing
The BRAVO III with EZ-Jaw is consigned in a cardboard packing box which can be re-used if
undamaged. When it is to be thrown away it is classified as solid urban waste and should be placed in
the special paper collecting bins.
The protective shell containing the machine is in polymer, classified as SUW, and can therefore be
placed in an ordinary waste bin.
Copyright Silca 2010
BRAVO III with EZ-Jaw
29