Tecno-gaz Master Flux Plux Instrucciones De Uso página 21

The operator can choose the best solution for processing the exhaled gases, using the
following connections:
UNIT-MOUNTED MASTER FLUX
Connect the hose, exhaust gas circuit mask
to the hose in the center at the center of the
unit.
Connect the circuit SMA197, to the hose
connection at the bottom of the cabinet.
Connect the end of the spiral tube to the
outside and make sure there is a final filter.
The discharge must take place in an open,
well-ventilated.
EVACUATION EXHALED GASES
PASSIVE EXHAUST
Connect the exhaust gas pipe of the
appropriate circuit hose (SMFA257) after the
spiral tube (SMFA197).
Connect the end of the spiral tube to the
outside and make sure there is a final filter.
The discharge must take place in an open,
well-ventilated.
WALL-MOUNTED MASTER FLUX
ENGLISH
7