Connection Instructions - Tecno-gaz Master Flux Plux Instrucciones De Uso

3
Check the integrity of the components.
Choose the most suitable mask for the patient.
Place the mask and adjust the head ribbon. The mask must be stable and comfortable for
the patient. Connect the pipes, paying attention to the arrow on the Y fitting. The arrow
indicates the flow direction. The non-return valves, placed in the fitting, push the gas flow in
the direction indicated by the arrow.
FLOW
DIRECTION
Gas inlet pipe: Connect a hose to the special corrugated tube (Item G) to the flow control
box by inserting the connector connection flow control box ".
Connect the free end to the Y connector placed on the mask, WITHOUT SIDE ARROW.
Gas inlet pipe: Connect the other corrugated pipe to the appropriate hose (Pos P) through
the elastomeric connector. Connect the free end to the Y connector placed on the mask,
SIDE WITH ARROW.
CONNECTION

CONNECTION INSTRUCTIONS

ENGLISH
G
P
5