Set Up The Tty/Tdd Profile; Tty/Tdd Calls - Nokia 2125 Manual Del Usuario

S e t t i n g s
Loopset
The LPS-4 Loopset (for use with T-coil equipped hearing aids) is recommended for
use with your phone. Select the option of your choice, to enter the submenu and
select Use loopset >
TTY/TDD
This feature is dependent on your carrier. In addition to the Nokia phone, you will
need the following for TTY/TDD communication:
• A TTY/TDD device that is cellular ready or cellular compatible.
• A cable for connecting the TTY/TDD to your Nokia phone, usually supplied by
the manufacturer of the TTY/TDD device.

Set up the TTY/TDD profile

To connect your phone directly to the TTY/TDD device, set up the TTY/TDD profile.
1. Connect one end of the cable to the TTY/TDD device.
2. Insert the other end of the cable into the headset jack.
3. In the standby mode, select
TTY/TDD > Use TTY

TTY/TDD calls

Important: Some manufacturers of TTY/TDD devices suggest that the
phone be at least 18 inches from the TTY/TDD device. When connecting
to any other device, read its user guide or contact its manufacturer for
detailed instructions and safety information.
• Check with the manufacturer of the TTY/TDD device for a connecting cable
that is compatible with the Nokia phone.
• TTY/TDD communications depend on network availability. Check with your
service provider for availability and description of services.
Make a call
1. In the standby mode, enter the number, and press the call key.
2. When the receiving party answers, begin typing your conversation on
the TTY/TDD.
3. Press the end key to end the call.
50
Yes or No to modify the settings.
Menu >
> Yes.
Settings > Enhancement settings >