Device Information - MINOX DTC 550 WiFi Manual De Instrucciones

and delete – and then either download or delete them. You can find the downloaded files in the gallery of your
smartphone, or on your Android device in a subfolder of the gallery. To leave the "Media" (E) option, tap on "Back" in the
upper left corner.
Previewing the photos and videos may take a few seconds, depending on the number of files.
Settings
The "Settings" option allows you to change all settings on your camera via the "MINOX WiFi Wildlife Camera" app.
Tap the "Settings" option in the options screen. The "Settings page" will now open and offer you various categories for
setting changes.
The individual setting options of these categories are explained in the following chapter.

Device information

Icon
Change the camera icon for the installed camera. By tapping on the camera icon, the smartphone gallery will now open.
Choose an image that you wish to use as an icon to represent your camera.
Name
Enter a new name for the wildlife camera so that the cameras can be uniquely identified if several cameras will be or have
been installed. The name of the camera may contain a maximum of 13 characters, consisting of upper- and lower-case
letters and numbers (e.g. Garden01).
After changing the name, the Bluetooth ID and WiFi ID (SSID) of the camera will change to the newly assigned name. After
saving the new name, the camera will restart and the app will jump back to the camera selection window. Tap the icon of
the camera. The Bluetooth connection will be automatically re-established. The WiFi connection setup will now be
displayed. Tap on "Device Settings" and select the WiFi network of the camera, which is now displayed under the newly
assigned name of the camera (e.g. Garden01). This procedure refers to setting up the camera using an iOS operating
system. With an Android system, the smartphone automatically connects to the camera's WiFi network.
Enter the WiFi password again. After the WiFi connection has been re-established, the camera can be selected under its
new name in the selection window of the camera (Fig.3).
Notes
Here you can enter notes, such as the location of the camera. Save your changes and entries with the "Save" button or
cancel the process with "Back".
Capturing
Delay
Set the length of time between each shot.
Mode
Set the capture mode of the camera. You can choose between photo, video or both (photo & video). Save your changes and
entries with the "Save" button or cancel the process with "Back".
Photo
Photo size
Set the photo resolution.
Number of photos
Select the number of photos taken when motion is detected.
40