English - i-tec CHARGER5P52WQC Manual De Instrucciones

INTRODUCTION
This adapter allows you to charge up to 5 USB devices at the same time. Four
devices can be charged via four USB-A outputs and one device via the one
Quick Charge 3.0 output.
One USB-A output has DC output voltage of 5V / max. 2.4A. All four USB-A
outputs are capable of delivering maximum DC 5V / 6.8A. These outputs
allow a wide range of use at home, in business centres and at the office. You
can charge mobile phones, tablets, GPS navigations, powerbanks, music
players, e-book readers, cameras, Nintendo Joy-Cons, Nintendo Switch Pro
controllers and other digital devices.
One major feature of this adapter is the one USB-A Quick Charge 3.0 output,
which can be used for the fast charging of mobile phones supporting this
feature. Quick Charge 3.0 can charge your mobile phone from 0 % to 80 %
in just 35 minutes, which is four times faster than normal charging. Quick
Charge 3.0 is also backward compatible with 2.0 and 1.0 in case your mobile
phone supports one of these older versions.
The AC 100-240V input allows for use anywhere in the world.
The adapter has no charge light indication, so it is suitable for use in bedrooms
and other rooms where light could disturb the sleep.
SPECIFICATIONS
• The charging adapter has one Quick Charge 3.0 output for fast mobile
phone charging. Quick Charge 3.0 can charge your mobile phone from 0 % to
80 % in just 35 minutes, which is four times faster than normal charging. The
adapter also has four USB-A outputs for charging mobile phones, tablets, GPS
navigations, powerbanks, music players, e-book readers, cameras, Nintendo
Joy-Cons, Nintendo Switch Pro controllers and other digital devices.
• Input voltage AC 100-240V, 50-60Hz, max. 1.5A
• Total output power: max. 52W (4x USB-A: max. 34W; Quick Charge 3.0: max. 18W)
• Efficiency: more than 80 %
• USB-A output voltage: DC 5V
• USB-A output current: max. 2.4A per connector; total output max. 6.8A
• Quick Charge output voltage: DC 3.6-12V (automatic detection)
• Quick Charge output current: max. 3A
• Protection against: current overload, overvoltage, short circuit and
overheating.
• Operating values: 0°C - 40°C
• Relative humidity: 10% - 90%
• Product dimensions: 94 x 61 x 28 mm
• Product weight: 209 g
USING THE POWER ADAPTER
Connecting the universal adapter to the device:
• Plug the adapter into the power outlet using the supplied power cord (make
sure that the plug is inserted properly in the adapter) and then you can connect
various digital devices using the 4x USB-A and 1x Quick Charge 3.0 outputs.
• All outputs are intended for charging mobile phones, tablets, GPS
navigations, powerbanks, music players, e-book readers, cameras and other
digital devices.
• iPad and Samsung Tab can be charged on any port.

ENGLISH

Quick Start
ENGLISH | 5