Built-In Hard Disk; Hard Disk - Sanyo DSR-3000 Manual De Instrucciones

BUILT-IN HARD DISK

Hard disk

Recording areas
The recording areas on the hard disk (normal recording area: 80%,
alarm recording area: 19%, archive area: 1%) are established
automatically when the power for the digital video recorder is turned on.
Images are recorded in the normal recording area when the REC/STOP
button is pressed, and they are recorded in the alarm recording area
when an alarm occurs. This is called the default condition, and the
following detailed settings can be confirmed in the sections on
"RECORDING IMAGES IN THE NORMAL RECORDING AREA" and
"RECORDING IMAGES IN THE ALARM RECORDING AREA" which
are explained later. Furthermore, settings such as the recording areas
and picture quality can be changed using the menu screens.
1% 1%
B Alarm Alarm
recording recording
area area
19% 19%
A
Hard disk recording areas
Menu screen (initial setting)
This can be displayed by pressing the MENU button.
<RECORDING AREA SET>
TOTAL CAPACITY
NORMAL RECORDING AREA
AREA FULL RESET
ALARM RECORDING AREA
AREA FULL RESET
ARCHIVE AREA
AREA FULL RESET
CAUTION : WHEN THE AREA SETTING IS CHANGED.
THE WHOLE AREA WILL BE INITIALIZED !
1
Picture quality: ENHANCED
Picture quality can be selected from five options.
The recording speed changes in accordance with the picture
quality selected.
2
Recording method: Can be set to FRAME or FIELD.
The recording speed changes in accordance with the method
selected.
3
Audio recording: Can be set to ON or OFF.
4
Recording speed: Shows the recording interval and the
recording time.
Refer to the recording speed table for further details.
5
Alarm recording setting: Can be set to ON or OFF.
When alarm recordings are to be made, select a setting such as
MODE1 for the OFF setting. The recording speed and alarm
duration will be displayed
C Archive area
80% 80%
Normal recording area Normal recording area Normal recording area
: 80GB
A A
: 80 %
->
B B
: 19 %
->
: 1 % C
->
A Normal recording area
•
When the REC/STOP button is pressed while monitoring is in
progress, images are recorded in the normal recording area.
•
When start and end times are entered for each day of the week and
are then enabled, timer recording is automatically carried out in the
normal recording area between the times that have been set.
B Alarm recording area
ALARM REC MODE SET menu settings are required.
•
Alarm recording is enabled when ALARM RECORDING is set. When
a suspicious person is detected by the switch or motion sensor that
is connected to the alarm input terminal, an alarm is recorded in the
alarm recording area.
•
Pre-alarm recording is enabled when PRE-ALARM RECORDING is
set. Pre-alarm recording repeatedly records the same images as for
normal recording in the alarm recording area, and overwrites these
images after the set time interval, until an alarm is detected. When
pre-alarm recording is set, the image immediately before an alarm
occurred can be recorded.
C Archive area
This is the area for copying important images from the normal recording
area and the alarm recording area. The size of the archive area can be
set to a maximum of 10 GB (12.5% of total capacity when using an
80-GB hard disk, 6.25% of total capacity when using an 160-GB hard
disk) by changing the size of the normal recording area or the alarm
recording area.
A
Setting screen for normal recording area picture quality,
recording speed, etc.
<NORMAL REC MODE SET>
PICTURE QUALITY
FRAME/FIELD RECORDING : FIELD
AUDIO RECORDING
REC CYCLE :
B
Setting screen for alarm recording area picture quality,
recording speed, etc.
<ALARM REC MODE SET>
PICTURE QUALITY
FRAME/FIELD RECORDING : FIELD
AUDIO RECORDING
ALARM RECORDING
REC CYCLE : 0.10SEC.
PRE-ALARM RECORDING
REC CYCLE : ¤¤¤ SEC.
=> (46400 ALARMS CAN BE RECORDED)
ALARM TRIGGER
MOTION SENSOR
10
1
: ENHANCED
2
3
: OFF
4
0.10SEC ( 54H)
1
: ENHANCED
2
3
: OFF
5
: OFF
4
DURATION: 1SEC
: ¤¤¤
DURATION: ¤¤¤
: ALARM
->
English