Operating Instructions - Bella 14607 Manual De Instrucciones

Operating Instructions

1. Place the Electric Skillet on a level surface such as a countertop or table.
NOTE: Some countertop and table surfaces, such as Corian® and other surfaces, are not designed
to withstand the prolonged heat generated by this Electric Skillet. We recommend placing a hot pad
or trivet under the Electric Skillet beforehand to avoid possible damage to the surface.
2. Be sure the sides and back of the Electric Skillet are at least 4 inches away from any walls, cabinets,
or objects on the counter or table.
3. Turn temperature control probe to the OFF position.
4. Plug the temperature control probe securely into Electric Skillet's control probe socket.
Plug cord into any standard 120V AC wall outlet.
IMPORTANT: ALWAYS PLUG CORD INTO SKILLET FIRST, THEN INTO WALL OUTLET.
5. Preheat Electric Skillet for approximately 5 minutes before cooking. To preheat, turn
the temperature control to desired temperature. The indicator light on the temperature control
probe will illuminate as soon as the dial is rotated. The light will go out once the selected
temperature has been reached.
6. Add food and cook according to the recipe. Adjust temperature control dial as necessary.
NOTE: During cooking, the light will go on and off indicating that the Electric Skillet is maintaining
proper temperature.
CAUTION: DO NOT USE COOKING SPRAYS. THEY CAN CAUSE A BUILD-UP ON THE COOKING
PLATES AND MAY AFFECT THE NON-STICK PERFORMANCE OF THE PRODUCT.
7. Liquids such as broth, water, etc. may be added to the Electric Skillet during cooking.
8. When cooking has been completed, turn the temperature control to the OFF position.
The indicator light on the temperature control probe will turn off.
9. Unplug cord from wall outlet. Let the Electric Skillet cool completely.
10. Remove temperature control probe from Electric Skillet.
Follow the Care & Cleaning Instructions described in this Owner's Manual.
11. CAUTION: ESCAPING STEAM IS HOT! BE CAREFUL WHEN REMOVING OR LIFTING LID. HOT
WATER CONDENSATION MAY BE CREATED ON THE LID, ALWAYS HANDLE WITH CARE.
To prevent personal injury or steam burns
due to hot water condensation follow those
instruction:
When removing lid from skillet, always tilt
the lid away when lifting (See Figure 3.)
When removing lid from skillet, always use
oven mitts or hot pads.
SO-312584_14533,14448_BELLA Ceramic 12 Skillet_WM_US_145x210mm_IM_R10.indd 6
Figure 3
6
2016-07-29 11:46 AM