Before Using For The First Time - Bella 14607 Manual De Instrucciones

Before Using for the First Time

1. Carefully unpack the Electric Skillet and remove all packaging materials.
2. To assemble the tempered glass lid, locate the lid knob packaging.
3. Holding the lid knob on the outside top of the glass lid, align the lid hole with the screw hole.
4. Place the head Phillips screw through the screw hole and the plastic washer on the inside of the lid.
5. Use a large Phillips screw driver to tighten the screw until snug. (See Figure 2.) Do not over tighten.
The glass lid is now ready for use.
6. Before cooking in the Electric Skillet for the first time, wash the non-stick Skillet in mild dishwashing
soap, wipe and allow to dry.
NOTE: THE SKILLET IS NOT DISHWASHER SAFE.
7. Turn the temperature control to 450˚ F and heat empty Electric Skillet uncovered for approximately
5 minutes. This will ensure the non-stick coating is ready for use. You will notice a slight odor;
this is normal and should quickly disappear.
8. Turn the temperature control to OFF and allow to cool for 15 minutes.
Figure 2
SO-312584_14533,14448_BELLA Ceramic 12 Skillet_WM_US_145x210mm_IM_R10.indd 5
Glass Lid
Lid Hole
Lid Knob
Screw Hole
Plastic Washer
Phillips Screw
5
2016-07-29 11:46 AM