Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3. Adjust the mixing blade holder unit over the mixing cup and tighten. Turn the cup upside down,
so the blade holder unit is below the cup. (Fig.3, 4)
4. Place the cup and blade assembly over the blender base aligning the mixing cup arrow with
the base unlock mark and rotate clockwise to the locked mark to adjust (Fig. 5).
NOTE: Align the arrow
to lock in place. If not aligned, the motor will NOT start. This is a safety feature.
5. Press the switch button to mix for periods under 1 minute. Note that the switch must be
pressed for the blender to work. Do not keep it pressed for periods longer than one minute or
use short pulses (work 3seconds stop 2seconds, 10-15times/minute) until your drink is at the
desired consistency. To unlock the mixing cup turn counter clockwise and remove from base.
6. After you finish mixing, pull the plug, remove the mixing cup and blade holder assembly from
the blender base (Fig 6), turn the cup over, unscrew and carefully remove the blade holder
with the lock sign
and twist clockwise
6
Tabla de contenido
