cecotec CONGA 990 Serie Manual De Instrucciones página 32

ENGLISH
Charging error.
The robot
cannot operate
correctly.
The robot
returns to
the charging
base before it
has finished
cleaning.
The robot did
not operate
automatically
at the appointed
time.
The remote
control does
not work (the
operation radius
is 5 meters).
32
The charging base is turned
off but the robot is on, the robot's
battery is low.
The robot is tangled or stuck by
wires or curtains.
The robot's battery is low and is
returning automatically to the
charging base.
The robot's cleaning time and
speed varies depending on the
type of surface.
The robot's power switch is off
and cannot operate.
The battery is low.
The robot is tangled or stuck.
The remote control's battery is
low.
The robot is turned off or the
battery is low.
Allow the robot to charge
on the charging base while
it is not operating.
If the robot cannot
untangle by itself, do it
manually.
Charge the robot.
The robot's cleaning
time and speed varies
depending on the floor,
obstacles and other
factors in the room.
Turn the robot on the
charging base while it is
not operating.
Allow the robot to charge
on the charging base while
it is not operating.
Turn the robot off, empty
the dust container clean
and clear.
Replace the batteries with
new ones.
Make sure the power
switch is on and that the
battery is full.