6.8
MAX LOAD ON SHELVES
Attention!
It is strictly necessary to comply with the max loads indicated (Kg) for each shelf to avoid deformation
or breakage.
6.9 FURTHER INFORMATION
Take out packaging and clean all the cabinet using warm water together with 5% of neutral soap then dry it
with a soft cloth; for the glass parts only use specific products, avoiding the use of water which can leave on the
glasses limestone residues.
10
THE REFRIGERATOR IS NOT SUITABLE FOR WORKING IN DANGEROUS ENVIRONMENT WITH RISK OF FIRE,
EXPLOSIONS OR RADIATIONS.
Operation is regular with ambient temperature indicated on technical data plate.
It is fundamental to comply with the distances indicated (cm) for correct
installation of the equipment.
Ventilation openings must be kept unobstructed in order to allow the unit
to work properly and for safety reasons.
• Cabinet must be installed on a perfectly even surface, far away from any
heat source (radiators, stoves, etc) including sun rays.
• It is necessary that the capacitor unit is in the free air exchange condition,
therefore the ventilation zones must not be obstructed by boxes or otherwise.
• Install and position the unit in such a way so as to allow easy access to the
power socket.
• Never place containers of liquid on or immediately above the ticket counter;
should the content spill out, it would damage the counter.
150 Kg / SQM
150 Kg / SQM
150 Kg / SQM
150 Kg / SQM
-34-