Features; Assembly - Ryobi P4500 Manual Del Operador

PRODUCT SPECIFICATIONS
Motor ...........................................................................................................................................................................18 V DC
No Load Speed (revolutions per minute) .............................................................................................approx. 210/min (RPM)
Waterproof Rating ........................................................................................................................................................... IPX7*
* IP Rating: Specifies the environmental protection the product enclosure provides. This product has an IPX7 rating meaning
it can withstand immersion in water up to 1 meter for up to 30 minutes.
KNOW YOUR POWER SCRUBBER
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ADJUSTABLE FRONT HANDLE
The front handle assembly can be adjusted for ease of
operation and to help prevent loss of control.
BATTERY COVER
The battery cover protects the battery port and battery from
moisture and debris.
UNPACKING
This product requires assembly.
 Carefully remove the tool and any accessories from the
box. All items listed in the Includes section must be
included at the time of purchase.
WARNING:
Items in this Assembly section are not assembled to
the product by the manufacturer and require customer
installation. Use of a product that may have been
improperly assembled could result in serious personal
injury.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.

FEATURES

NOTE: This product is not recommended for use with RYOBI
ONE+ battery packs larger than 4.0Ah. If installed, large
capacity battery packs will prevent the battery cover from
closing completely exposing the battery and the battery port
to moisture, debris, and other contaminants.
SIX-POSITION PIVOTING HEAD
The motor head can be adjusted with the pivot button.
REAR HANDLE WITH OVERMOLD
The rear handle with overmold provides added user comfort.
TELESCOPING SHAFT
The scrubber can be adjusted to different extension points
for ease of use.

ASSEMBLY

WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended for use
with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading
to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
ATTACHING THE FRONT HANDLE
See Figure 1, page 10.
 Slide the spacer into the opening at the bottom of the
bracket.
 Insert the wing bolt through the bracket, spacer, and
handle as shown.
 Adjust handle up or down, if necessary, to desired
operating position.
 Tighten wing bolt to secure.
6 – English