Tabla de contenido
Idiomas disponibles
Idiomas disponibles
VII. BEFORE ADDRESSING A SERVICE CENTER
Error Code
Error Description
Е1
Pressure switch malfunction
Е3
Temperature sensor short circuit
E4
Temperature sensor open circuit
Е5
Device is overheated
Problem
The appliance does not switch on
The device fails to seal hermetically. Steam escapes
from the rim of the lid
Dish is taking too long to cook
The packaging, user manual and the device itself shall be taken to the applicable collection point for the recycling of electrical and electronic
equipment. Do not throw away the electronic waste with household trash to help protect the environment.
© REDMOND. All rights reserved. 2015
Reproduction, transfer, distribution, translation or other reworking of this document or any part thereof without prior written permission of the legal
owner is prohibited.
Error Handling
Unplug the appliance and let it cool down. Close the lid tightly. If this
does not eliminate an error address an authorized service center
Address an authorized service center
Address an authorized service center
Unplug the appliance and let it cool down
Possible Cause
Voltage supply failure
Sealing ring is missing or improperly positioned
Sealing ring is dirty
Sealing ring became deformed
Voltage supply interruption
There is a foreign object between the bowl and the
heating element
The bowl is not properly positioned
Heating element is dirty
Solution
Check the voltage supply
Position sealing ring properly
Clean sealing ring
Replace sealing ring
Check the voltage supply
Remove foreign object
Position the bowl properly
Unplug the device and let it cool down. Clean heating
element
RMC-M110A
ENG
17
17
Tabla de contenido
