Tabla de contenido
1
46
5-11
3
2
5-12
Operation
5.6 Data detection mode
5.6.1 Selecting the Type of Vehicle
Select the Type of Vehicle before the measuring run.
— On the RIM DATA ENTRY screen Fig. 5-11 press
the menu key F2 to select the Type of Vehicle.
— Select the option according to the rim on the
machine.
When the selection has been made, the Type of Vehicle
in use identifi cation icon will be displayed in the F2
taste Fig. 5-11.
Fig. 5-12 Assigned itemsTypes of Vehicle:
1 Standard vehicle wheel (car)- nominal dimensions
in inches.The unit of measure (inches) is displayed.
Normal and Alu 1 to Alu 5 weight positioning can be
selected. To select a standard wheel with nominal
dimensions in mm - TD or TRX wheel, you should
select the mm/inch option from Menu F6 in the
ENTERING RIM DATA screen (Fig. 5-11).
2 Light industry vehicle wheel (Van) - nominal
dimensions in inches. Executable steps are
expressed in the "Product Requisite" table at the
end of the manual.
The threshold value for suppression of minor
unbalances is automatically doubled when this type
is chosen and the resolution of the amount reading
set to 10 g and 5 g respectively.
3 Motorcycle wheel - nominal dimensions in inches,
with imbalances resolved and suppressed in the
same way as car wheels. Consult executable steps
in the "Product Requisite" table.
Tabla de contenido
