For Kd-Ar765S; Installation; Wiring Connection - JVC KD-AR765S Manual De Instrucciones

Wiring connection

KD-AR765S KD-R760 / KD-R660
Vehicle dashboard
Factory wiring
harness (vehicle)
Blue: To power antenna
Blue/white: To amplifier
Vehicle-specific Wiring
Harness (separately
purchased)
For more information:
Metra Electronics:
www.metraonline.com
Scosche Industries:
www.scosche.com
KD-AR565 / KD-R460
Front/ rear/ subwoofer
output
Antenna terminal
To the steering
Light blue/yellow
wheel remote
STEERING
control adapter
WHEEL
REMOTE
Recommended
Join the same color wires together.
connection
Blue/white: Remote (200 mA max.)
Orange/white: Illumination
Brown: Tel muting
Yellow: Battery 12 V
Red: Ignition 12 V
Black: Ground
Gray: Front speaker (right)
Gray/black
White: Front speaker (left)
White/black
Purple: Rear speaker (right)
Purple/black
Green: Rear speaker (left) *
Green/black *
Signal cord
(not supplied)
Fuse (10 A)
Ignition switch
Separate red wire
Make this connection if your
vehicle factory wiring harness
does not have "12 V ignition
switch" wire.
* 2
You can also connect a
subwoofer speaker directly
using this lead without an
2
external subwoofer amplifier.
2
For setting, 15, 16.
* 1
Firmly connect the ground
wire of the amplifier to
the car's chassis to avoid
JVC Amplifier * 1
damaging the unit.
Part list for

installation

Remote wire
(not supplied)
(A) Faceplate

For KD-AR765S:

To the optional
SiriusXM Vehicle
Tuner (commercially
(B) Trim plate
available) ( 11)
(C) Mounting sleeve
Car fuse block
(D) Wiring harness
(E) Extraction key
23
ENGLISH