cecotec CONGA 1490 Manual De Instrucciones página 39

ENGLISH
remote control for the robot to automatically return to the charging base.
Fig. 11
Note: If the robot's battery is low during operation, it will automatically return to the charging
base before running out.
Battery's service life
In order to lengthen the battery's service life:
Allow the robot to charge for 5 hours during the first charge.
Charge the robot as soon as possible when the battery is low.
If the robot is not going to be used for a long time: fully charge the battery, switch the robot off
and store it in a cool and dry place.
If the robot has been stored for a long time, allow it to charge for 5 hours before operating it
again.
APP functions
On/Off/Standby/Sleep
On/off/Standby
Make sure the power switch is turned on.
During standby mode, press the On/off button on the robot or on the remote control to start
the robot up.
During Sleep mode, press the On/off button once to switch the robot to standby mode and
then again to start cleaning.
Standby
During this status, the robot is switched on and waiting for user operation.
During operation, press to stop and switch the robot to Standby mode.
Sleep mode
During standby mode, press the On/off button on the robot or on the remote control to start
the robot up.
During standby mode, press the On/off button on the robot for 7 seconds to enter Sleep mode.
During standby mode, the robot will enter sleep mode after 10 minutes of no operation.
Water intensity
Short press the water intensity to adjust the water intensity during scrubbing mode. Select
between 3: High, 2: Medium o 1: Low.
Power
Select between 3: High, 2: Medium o 1: Low. The display will show 1, 2 or 3 and the robot will
emit the number of beeps respectively.
39