Echo HCA-265ES-LW Manual De Instrucciones página 18

Before you start
1. Throttle cable
2. Adjustment fixture
3. Throttle swivel hole
4. Adjustment nut
5. Locknut
1. Ignition leads
1. Ignition leads
2. Clip
3. Fan cover clip
2. Place throttle cable into adjustment fixture and install wire
end into large carburettor throttle swivel hole.Check throttle
for freedom of movement and that wide open throttle / low
idle extremes are adjusted properly. The throttle cable must
be adjusted by moving the adjustment nut.
3. Tighten locknut.
4. Connect 2 ignition leads from throttle cable tubing to 2 igni-
tion leads on engine.
5. Secure ignition leads against engine with clip.
6. Install throttle cable into fan cover clip.
7. Install air cleaner cover.
Wiring runs must not interfere with throttle operation.
16
CAUTION