Makita DLM431 Manual De Instrucciones página 3

Ocultar thumbs Ver también para DLM431:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Repair any damage before restarting and
operating the mower. Replace the blade if it
is damaged in any way.
18. Use identical replacement blades only.
19. This cutting machine is capable of amputating
hands and feet and throwing objects. Failure
to observe the following safety instructions
could result in serious injury or death.
20. Only allow responsible adults, who are familiar
with the instruction, to operate the mower.
21. Be sure the area is clear of other people before
mowing. Stop mower if anyone enters the area.
22. Never direct discharged material toward
anyone. Avoid discharging material against a
wall or obstruction. Material may ricochet back
toward the operator. Stop the blade when crossing
gravel surfaces.
23. Do not pull the mower backwards unless
absolutely necessary. When you are compelled
to back the mower from a fence or other similar
obstruction, look down and behind before and
while moving backwards.
24. Release switch lever and wait for blade
rotation to stop before crossing driveways,
walks, roads and any gravel-covered areas.
Also remove key if you leave it, reach to pick up
or remove something out of your way, or for any
other reason that may distract you from what you
are doing.
25. Do not operate machine without the entire
grass catcher, discharge guard, rear guard, or
other safety protective devices in place and
working.
26. Stop the motor and remove the key whenever
you leave the equipment, before cleaning the
mower or unclogging the chute and making
any repairs or inspections.
27. Shut the motor off and wait until the blade
comes to a complete stop before removing the
grass catcher. Beware that the blades coast after
turn off.
28. Mow only in daylight or good artificial light.
29. Disengage the self-propelled mechanism or drive
clutch on the mower so equipped before starting
the motor.
30. If the equipment should start to vibrate unusu-
ally, stop the motor and check immediately
for the cause. Vibration is generally a warning of
trouble.
31. Do not insert key into mower until it is ready to
be used.
32. Don't grasp the exposed cutting blades or
cutting edges when picking up or holding the
appliance.
33. Check the blades carefully for cracks or dam-
age before operation. Replace cracked or
damaged blades immediately.
34. Never attempt to make wheel height adjust-
ments while mower is running.
35. Check the grass basket frequently for wear or
deterioration. For storage, always make sure
the grass basket is empty. Replace a worn grass
basket with a new factory replacement one for
safety.
36. Check grass basket components and the
discharge guard frequently and replace with
manufacturer's recommended parts, when
necessary.
37. Mow across the face of slopes, never up and
down. Exercise extreme caution when chang-
ing direction on slopes. Do not mow exces-
sively steep slopes.
38. Watch for holes, ruts, bumps, rocks, or other
hidden objects. Uneven terrain could cause a slip
and fall accident. Tall grass can hide obstacles.
39. Do not mow on wet grass or excessively steep
slopes. Poor footing could cause a slip and fall
accident.
40. Do not wash with a hose; avoid getting water
in motor and electrical connections.
41. Check the blade mounting bolt at frequent
intervals for proper tightness.
42. Keep all nuts, bolts, and screws tight to
be sure the equipment is in safe working
condition.
43. Never remove or tamper with safety devices.
Check their proper operation regularly. Never
do anything to interfere with the intended
function of a safety device or to reduce the
protection provided by a safety device.
44. Maintain or replace safety and instruction
labels, as necessary.
45. Battery tool use and care
Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery cartridge may
create a risk of fire when used with another
battery cartridge.
Do not charge lawn mower in rain, or in
wet locations.
When replacing batteries, all batteries
should be replaced at the same time.
Mixing fresh and discharged batteries could
increase internal cell pressure and rupture
the discharged battery.
Use power tools only with specifically
designated battery cartridges. Use of any
other battery cartridges may create a risk of
injury and fire.
When battery cartridge is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal
to another. Shorting the battery terminals
together may cause burns or a fire.
Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
SAVE THESE INSTRUCTIONS.
3 ENGLISH
Tabla de contenido
loading

Tabla de contenido